Vinyl top replacement

While I was a bit mad or at least unhappy with the cost changes on the legendary top, I cant say anything bad about the quality of it. I will say this, be very sure that when you do the top that you can control the temperature when you're doing it. It made a world of difference with the install. The roof metal can very easily be too hot. While you do want the vinyl to be warmer for ease of handling as the material is thick and doesn't flex or stretch if it's cold. Not that you want to do alot of pulling and stretching.
You do need to be able to get it to stretch flat in some areas. And I tried using the rattle can glue with minimal success, but using the 3m glue in a cup sprayer where you can really lay down some thick layers is key. I laid the top out in the sun. Had the car out in it for 30 minutes, pulled into the shop and laid the top out loosely in place and got after it. The top should be laid out on top of the car or something like that to get the shipping creases out days in advance. Good luck, should be very doable for you.