Rapom's Rocket - just another Duster build thread
As mentioned before the clutch slave cylinder hit the floor in one little spot which bound it up enough to be a problem. Options: "relieve" the floor pan, move the bracket on the trans cross member down or what I decided to do, flip the slave around and hook it to the clutch arm instead of the trans X member . This moved the slave up and farther away from the header's heat, hose hook ups and the bleed port were in much better positions and the floor rub issue was solved, but, I had to tap the treads in the heim joint for the all thread rod I was using.
As mentioned before the clutch slave cylinder hit the floor in one little spot which bound it up enough to be a problem. Options: "relieve" the floor pan, move the bracket on the trans cross member down or what I decided to do, flip the slave around and hook it to the clutch arm instead of the trans X member . This moved the slave up and farther away from the header's heat, hose hook ups and the bleed port were in much better positions and the floor rub issue was solved, but, I had to tap the treads in the heim joint for the all thread rod I was using.