Rapom's Rocket - just another Duster build thread
Just above the rod end in the above picture you can see the wires from the electronic speedometer sensor installed where the old speedo cable used to hook up. I extended them up to the back of the dash and put two disconnects in the loom, one at the back of the dash cluster and the other down by the frame rail for ease of maintenance.
The O2 sensor wires were similarly routed down along the trans tunnel to the bung I installed in the header adapter. A wire clip was put in by the fire wall flange to keep the wire connector from flopping around and possibly getting damaged.
Mancini bolt style trans mount with poly bushings.
Trans cross member bolt in the way but you can just start to see where I relieved the top to clear the 1-2 shift rod.
Just above the rod end in the above picture you can see the wires from the electronic speedometer sensor installed where the old speedo cable used to hook up. I extended them up to the back of the dash and put two disconnects in the loom, one at the back of the dash cluster and the other down by the frame rail for ease of maintenance.
The O2 sensor wires were similarly routed down along the trans tunnel to the bung I installed in the header adapter. A wire clip was put in by the fire wall flange to keep the wire connector from flopping around and possibly getting damaged.
Mancini bolt style trans mount with poly bushings.
Trans cross member bolt in the way but you can just start to see where I relieved the top to clear the 1-2 shift rod.