904 Transmission Stopped Going Into Gear

The seam on that bushing looked a little opened up. You need the right size tool for the bushing that you're driving in. It was probably distorted when it got cocked sideways and opened the seam causing a high spot elsewhere. Replacing bushings isn't as simple and easy as it might seem. I can beat them in with a big washer, but I've been at it a while. If that bushing is distorted; not touching the drum all the way around, you need to remove it and install a new one. Replacing all the bushings is a lofty goal for a beginner and chances are one or two won't go in right, causing more problems than just a slightly worn bushing would have.