SS/B Barracuda project
Seat Brackets… now let´s see…
No, you can´t make these brackets fit properly.
I think vendor who made these brackets messed up…
Look at the pics and see for yourself.
Blueprint in the ´68 SS Hemi Guide says 12 3/10” between holes. Same measurement as in the floor. This narrower part of the bracket was meant to face towards floor. Not like Hurst had to bolt them, because Vendor made them wrong.
Measurement between holes in bracket is some 11 9/16”.
Alu stripe to left is something I use between bracket and seat frame.
Holes should have been drilled half an inch from end.
Another picture of what went wrong. Holes should have been drilled a little further apart in the bracket.
Distance between holes in floor is 12 3/10” like blueprint says bracket should have had.
Time and money was ruling this whole project now, once it was on the go...
"Just bolt the darn seats to the floor".
Seat Brackets… now let´s see…
No, you can´t make these brackets fit properly.
I think vendor who made these brackets messed up…
Look at the pics and see for yourself.
Blueprint in the ´68 SS Hemi Guide says 12 3/10” between holes. Same measurement as in the floor. This narrower part of the bracket was meant to face towards floor. Not like Hurst had to bolt them, because Vendor made them wrong.
Measurement between holes in bracket is some 11 9/16”.
Alu stripe to left is something I use between bracket and seat frame.
Holes should have been drilled half an inch from end.
Another picture of what went wrong. Holes should have been drilled a little further apart in the bracket.
Distance between holes in floor is 12 3/10” like blueprint says bracket should have had.
Time and money was ruling this whole project now, once it was on the go...
"Just bolt the darn seats to the floor".