Comp cams xe268h for 318

AJ/FormS said
Absolutely yes,but I would not install that cam until I knew were the advertised was measured from, and if I didn't like the answer, I'd still throw it away. 278/288/112 with lifts of .421/.444,and .050s of 204/214 I wanna say;what a waste of a core/blank. Well 10 minutes on U-tube proves it; it idles like a 278/288 measured at .006
That will make the ICA around 68 to 70 degrees , which will kill any weakazz cylinder pressure you mighta had as a stocker.The Dcr works out to 6.1 with an 8.0Scr starting point. The 2800 is like putting a band-aid on a gushing wound.OK well maybe that's an exaggeration,lol. But I wouldn't even put that cam in my 367@ 11.3 Scr.

AJ the 278 is measured at .004 That is a long ground in Detroit cam with Crane's name on it. Remember Crane bought a big Detroit grinder
421 lift with 204 duration is a dead give away 204 @ .050 should have at least .450 lift and should be able to do it with [email protected] or 254ish @.006
as I said earlier there is no reason to have +12 on the exhaust today all that does is increase reversion
Mike Jones, Lunati, Howard, Bullet all have cams with around [email protected] with 450 lift so might Engle
The 248 DC cam would be a better choice with his compression, gears, converter, family (also mid 250 duration at .006) 248 is more like .008)