Cam for 340 with 2.97 gears

bbab3 said

Did a bit of research today. called Comp Cams, Lunati and Crowler.
Comp 274xe with I .488 E .491 @50* I 230* E 236* lsa/cl 110*/106*
Lunati 10200702 with I.475 E .494 @50* I 220* E 236* lsa/cl 112*/108*
Crowler 31918 with I .444 E .464 @50* I 214* E 224* lsa/cl 114*/?
Anyone have experience with any of these cams and recommendations?

Click to expand...

I have with the old comp and the crower Baja Beast
the XE274 chevy cam is not the XE274HL mopar cam
Baja Beast is or at least was a chevy grind Crower has Mopar grinds but special order on the shorter ones
does not 214-224 raise the red flag of "made in Detrtoit"? also way to long an exhaust if you are using headers (same with Lunati but shorter intake holds down the overlap)
notice how the Lunati gives you the same lift as then non HL comp with 10 degrees less intake duration- more low end torque- more dynamic compression
you need to post seat duration and intake close points- seat timing for the dynamic compression guys to give you closer results
Clear choice of these three is the Lunati unless you actually need a shorter or longer duration to run a different rpm range
good work so far