T56 Magnum Conversion
I worked on the bellhousing alignment today, with the 0.007 offset dowel pins, my total indicated runout was 0.004", so a really good measurement, so they are locked down now and I moved on to do the final install on the transmission. I got the flywheel all torqued, clutch with new GM 26 spline disk installed, and bellhousing back on. I still have to put all the bolts back in and the starter, and then it will be on to measuring the depth for the throwout bearing, setting the shims, and connecting the line to the master cylinder. At that point, the transmission can go in for good hopefully!
I also found out my driveshaft shipped from Strange so hopefully I'll see that in a few days as well.
I worked on the bellhousing alignment today, with the 0.007 offset dowel pins, my total indicated runout was 0.004", so a really good measurement, so they are locked down now and I moved on to do the final install on the transmission. I got the flywheel all torqued, clutch with new GM 26 spline disk installed, and bellhousing back on. I still have to put all the bolts back in and the starter, and then it will be on to measuring the depth for the throwout bearing, setting the shims, and connecting the line to the master cylinder. At that point, the transmission can go in for good hopefully!
I also found out my driveshaft shipped from Strange so hopefully I'll see that in a few days as well.