904 Transmission Stopped Going Into Gear

I agree, something is not quite right still.

I think I discovered something else.

I took a closer look at all thrust washer thicknesses and compared them to the book:

-pump washer is .072" (book says it should be .061-.063") BAD
-forward drum washer is .071" (book says it should be .061-.063") BAD
-output shaft washer is .081" (book says it varies, could be .052-.085") Possibly OK

- both 3 tabbed thrust washers are .049" (book says they should be .048-.050")OK

I think I'll get 2 correct thickness washers for the pump and forward drum and then then see what the endplay is.

I will take another look at the output shaft support and shaft area.