Post your Dash Pics
Here's what I am doing for the dash in my 66 B-Cuda. Stock bezel, and metal rear frame. HR mag did this to a 66 dash, but they cut the whole back out of the frame. I used a whole cutter, and just made 4 hole, for each gage, for rear acces.
I am using the stock speedo, and vac gage. I plan on using most of the under dash stock wiring as possible, and bypass thru the bulkhead connector.
The speedo, and vac gage are lit up green also, it just not showing in the pic.
bulbs are all geen LEDs.
I am using Equos 2 in elec gages.
Dave
Here's what I am doing for the dash in my 66 B-Cuda. Stock bezel, and metal rear frame. HR mag did this to a 66 dash, but they cut the whole back out of the frame. I used a whole cutter, and just made 4 hole, for each gage, for rear acces.
I am using the stock speedo, and vac gage. I plan on using most of the under dash stock wiring as possible, and bypass thru the bulkhead connector.
The speedo, and vac gage are lit up green also, it just not showing in the pic.
bulbs are all geen LEDs.
I am using Equos 2 in elec gages.
Dave