67/68/69 cuda dilemma
Sandblasted and taped off pivot points before primer. Will paint the lever arm parts silver, and use some aeroshell 22 or some graphite dry film lubricant on them. Cable levers were rusted frozen in place. Needed a vise and WD40 to get apart. Everything in the E brake setup was badly rusted. I think the truck it was out of periodically went through high water, as the axle ends were pretty rough as well.
Sandblasted and taped off pivot points before primer. Will paint the lever arm parts silver, and use some aeroshell 22 or some graphite dry film lubricant on them. Cable levers were rusted frozen in place. Needed a vise and WD40 to get apart. Everything in the E brake setup was badly rusted. I think the truck it was out of periodically went through high water, as the axle ends were pretty rough as well.