What Are You Doing To/With Your Car Today?

When I adjusting my valves earlier in the week I found the #8 intake rocker adjuster backed out and clattering. Today I drove it to work and the clattering was back, I pulled it down and the same adjuster was backed out and finger loose. I checked my pushrods and they weren't visibly bent but when I rolled them with a light behind them I could see they were all bent 5 to 10 thousandths. I researched the topic in the forum again and called Smith Brothers pushrods and ordered their pushrod measuring tool and a set of their locking rocker arm adjusters. Now I have to surface all my rockers for the locknuts and mock it back up to measure the length of the pushrods I really need for my 273 Lunati hydraulic cam/lifter set. When I have the correct effective length of pushrods I need, Smith Brothers will build me a set of the ones I have needed all along and my motor will take another step to being correct.
RE: the new AVS2 I recently installed I called Eddy tech line and I am ordering new metering rods and a tuning spring set. It will be interesting to see if I run out of money, become single again or die before I get this thing sorted. Winter storage is off for at least another month and that is what I did to/for my car today.