Any one interested in the oiling mods I did?

Jadaharabi said

Nice video I see you have your star in it. Look at this thread I just created and see if it helps you out.

Are you going with a solid or a hydraulic cam?
Are you going with a rear sump pan?
If so you know you cannot run a pickup off the bottom of the pump. You need a rear sump pan to do that.

Still working on getting my pictures to upload on my thread I started.


My take on the oiling system crossover tube for the small block

Click to expand...

Hydraulic.
Car pan mid sump.
So, I'm kinda limited then on pickup size to the factory 5/8 ok pipe.
That thing is skinny on the inside.
.625 ID with a min. of .440 ID.

So after drilling everything to 1/2" feeds It seems I should have at least a 5/8 id pickup.
What are the options for center sump guys?

Got some pipe plugs and set screws from Lowes.
Picked up tap n die set from Autozone.
Only pipe taps I could find were 1/8 and 1/4' NPT from O'reileys.

Headed to your link now.