Last one to post in this thread wins!

JeffisOld said

i posted the incorrect link on the gun sir. This one, as you will see has multiple nozzles from 1.2 to 2.0. See link below. I will need to buy cups/bags/filters I believe.

Yes sir, I am going to bare metal on the exterior and spraying Nason 1:1 Epoxy Primer. Planning to spray that on the interior also with the bottom done in POR-15 after using their prep products.

My understanding on the exterior is to use 80 grit prior to epoxy.


3M Accuspray ONE Spray Gun Kit - 16578

Click to expand...

Looks like the tips are disposable so no cleaning the gun with thinner. I would think the cups are disposable as well and shouldn't need bags. Nice Jeff looks good to me.
That works using 80 grit depends on the brand of epoxy primer.
And good to here you are using POR-15 as well as there prep. Most people just use there paint and end up with rust coming back through because they didn't fallow the directions close enough.
I don't know if you have used POR-15 before but I am sold on it. I painted a big sewer truck tank about 3 years ago and was really deep rust and I used the prep and did what they called for and it was a friend of mines truck so I see it lots. No other paint just POR-15. It faded but no rust even with sewage spilled on it.
I see POR-15 makes a paint for cement that is suppose to be real good stuff and was going to try it on my garage floor.