my Low dollar 318 hop-up project

Ottmundr said
Hey 318willrun, after reading through your s-u-p-e-r-l-o-n-g thread several times, and having completely lost track of all the things you did for five hundred bucks, can you give us a simple list of the things that you did with your teener?

Hey Ottmundr.… remember this 2016 post ^^^^^ LOL..... :D
Just kidding... :) Only things that changed in what I answered in the quote below is the car now has an action plus intake (from the intake thread I did) and a 770 Holley on top. This intake/carb only ran the 1/8 (yesterday), due to weather, and did the best 1/8 mile with a 9.57 pass (2 tenths faster than the previous). Read List in quote below. ET slips are in Post 574

318willrun said
Here it is.....
600 eddy - 85.00 to my front door (ebay)
Cast intake - 60.00 to my front door (FABO)
KS Fel 2114 complete engine gasket kit - 58.00 (Summit)
EDL5877 springs - 48.00 (Summit)
K50052 cam kit - 110.00 (Summit)
Double roller timing set - 39.00 (Summit)
Sealed Power exhaust valves - 56.00 (Summit I think)
Porting, cleaning heads and valve grinding compound - 35.00
8 qty of 1/4 inch set screws to plug smog holes - 3.00
4bbl carb base gasket - 1.00

I believe this to be the completed list.... 495.00 dollars.

Nothin' like consistency... :D (below post two years later) :D

Ottmundr said
After 600+ posts, would you ~~explain~~ sum up everything you've done for this budget build and include recipts and timeslips?

And a quick review, this was throwing "under" 500 bucks at a 318 2bbl in a Duster with 2.76 gears, 904 stock converter, with dual exhaust using manifolds. Goal was to run with a Stone-stock factory '73 340 Duster, auto, 3.21. Mission accomplished.