My take on the oiling system crossover tube for the small block

mopardude318 said
Right. The ARP stud calls for 110 ft lbs with ARP lube. The torque spec for the ARP bolt under the oil pump is the same going off of ARP website.

https://arpinstructions.com/instructions/140-5002.pdf

.
You may be looking at the wrong instructions. I believe this 5002 is a 12-sided bolt head. Where as the 5001 is a six-sided bolt head which is torqued to only 100 pounds. While a stud and nut is torqued to 110 lb.