1972 Duster Build with my Daughter
Disassembled and rebuilt one of the rear wing windows while we were waiting for the flash time between the clear coats. This was a Detroit Muscle Technology kit that gives you everything. You have to drill out a rivet to get the glass out. We put the chrome on the buffing wheel and it shined up nicely. We will document the other one to show how to do it. The hood is screwed up, I sanded it smooth and will order some SPI black tomorrow then redo it sometime later. We installed the doors and trunk for good. We needed a trunk cylinder and as expected the aftermarket is crap. They did not crimp the chrome enough so it would not go in enough to get the clip on with the gasket on it. A rag over a socket for cushioning and a punch crimped the more so it would set deeper in the tail panel.
Disassembled and rebuilt one of the rear wing windows while we were waiting for the flash time between the clear coats. This was a Detroit Muscle Technology kit that gives you everything. You have to drill out a rivet to get the glass out. We put the chrome on the buffing wheel and it shined up nicely. We will document the other one to show how to do it. The hood is screwed up, I sanded it smooth and will order some SPI black tomorrow then redo it sometime later. We installed the doors and trunk for good. We needed a trunk cylinder and as expected the aftermarket is crap. They did not crimp the chrome enough so it would not go in enough to get the clip on with the gasket on it. A rag over a socket for cushioning and a punch crimped the more so it would set deeper in the tail panel.