The 360 is in the same boat as the 318 needs to be bored and machined.
So I talked to a machinist he priced 250 for clean bore and cam bearings I asked how much without the bearings and he kinda acted like I was stupid Haha apparently not many ppl do that their self. But he never answered me so 250 for the bore. 100 if I wanted to mill the deck 100 to install new pistons and 150-300 for balance depending weither he needs to add or take weight. Apparently adding is more expensive. And then 179 for new pistons and rings. So I'm looking at around 800 bucks minimum! That's including the 150 for the new bearings or anything else. I dont have that. So I guess I'm looking for a running engine again. Thanks for all the advice guess and keep me posted if you see anything close to my area. I'm looking on fb and gonna call the local junkyard either a magnum or la would be fine with me.