W2 Stroker comin together!
Khugner250, nice shots! Thanks. I couldn’t find the other members W5 engine that I swore I had pictures of. But that is an excellent side engine shot showing that cooling mod.
MP race water pump for use with a flat plate behind it, not a stock timing cover. First picture below is where you would tap it from the outside.
Second picture is a head on shot showing both flat surfaces on each side of the water pump.
3rd picture is the back side of the pump. You should note several things about this pump.
On the back side the spinning water pump blades are covered by an anti cavitation plate and is only Recessed so deep. Hence the flat plate behind the pump. Or motor plate. Also note where the outside flats are on the inside. The lack of any other watering outlets on the fron face with its multi hole drilled for various fan/pulley attachment variations.
Khugner250, nice shots! Thanks. I couldn’t find the other members W5 engine that I swore I had pictures of. But that is an excellent side engine shot showing that cooling mod.
MP race water pump for use with a flat plate behind it, not a stock timing cover. First picture below is where you would tap it from the outside.
Second picture is a head on shot showing both flat surfaces on each side of the water pump.
3rd picture is the back side of the pump. You should note several things about this pump.
On the back side the spinning water pump blades are covered by an anti cavitation plate and is only Recessed so deep. Hence the flat plate behind the pump. Or motor plate. Also note where the outside flats are on the inside. The lack of any other watering outlets on the fron face with its multi hole drilled for various fan/pulley attachment variations.