I screwed up, neep help
Keith, I thought about that but i decided to try to get them out first. I'm down to 1 screw, of course getting them back in is not going to be fun either. The good thing is 65 ChargerDart is saying that the top parts don't go into any clips so i dont have to put them back in.. I brought in the trim after some polishing of the headlight trims and placed them on the car. I agree that they dont get snapped into a clip but I'm not sure whats going to hold them in place. I"m hoping either 65ChargerDart or another Dart owner has some pics of theirs and how they installed them. Here are some pics of the trims from the rear side and some pics with them sitting in place.
Below is both trim pieces sitting in place.
Below is the upper trim turned over and you can see no tabs to go into clips
Below is just the outside trim that I will need to put my screws back into to hold it in place
Below is the side trim that has about 6" on the bottom then goes up the side and will slide into the top trim piece. You can see the tabs for the lower side screw and the bottom screw.
Below is the window area with no trim on and you can see the holes for the screws. I had put the clips all the way around but have taken them out now to hopefully put them back in for the trim.
If anyone has pics of what holds the lower top trim in place I would like to see it.
Thanks Rod
Keith, I thought about that but i decided to try to get them out first. I'm down to 1 screw, of course getting them back in is not going to be fun either. The good thing is 65 ChargerDart is saying that the top parts don't go into any clips so i dont have to put them back in.. I brought in the trim after some polishing of the headlight trims and placed them on the car. I agree that they dont get snapped into a clip but I'm not sure whats going to hold them in place. I"m hoping either 65ChargerDart or another Dart owner has some pics of theirs and how they installed them. Here are some pics of the trims from the rear side and some pics with them sitting in place.
Below is both trim pieces sitting in place.
Below is the upper trim turned over and you can see no tabs to go into clips
Below is just the outside trim that I will need to put my screws back into to hold it in place
Below is the side trim that has about 6" on the bottom then goes up the side and will slide into the top trim piece. You can see the tabs for the lower side screw and the bottom screw.
Below is the window area with no trim on and you can see the holes for the screws. I had put the clips all the way around but have taken them out now to hopefully put them back in for the trim.
If anyone has pics of what holds the lower top trim in place I would like to see it.
Thanks Rod