Console shifter parts needs for 1967 dart

Consoles attach to forward and rear brackets with 4 screws. Shifter assembly is mounted on a support bracket with 4 bolts.
There's still one more piece. It bolts to the trans and captures the lower end of the drop rod? torque rod? whatever it's called. This piece varies a little bit for different applications. These are available somewhere also but I can't say exactly where. Lets hope another member can chime in with more info.
The one shown with a angled bend goes on the side of the shifter support bracket to capture upper end of same rod.
Reverse lamp switch would be on the shifter through early 68 model. If you have a later model trans with 3 post neutral safety switch you could route the 2 purple reverse lamp circuit wires to there and not need the shifter mounted switch. Anyway... that's why some shifters have the switch and some don't even though they have the 2 bolt holes for the switch.
One of our members needed the shifter mounted switch. It's a tough find. If my memory serves, he used parts from a column mounted switch to repair his shifter mounted switch.