Vacuum advance tube fitting fell out of carb! Advise?

Doug.S said
I bought it at Mike’s Carburetor Parts out of Chehalis WA. They have a good website. 49.00 plus shipping. Wire it into any 12 volt supply that is turned off and on by the key. The little black box with the wires going into it is the temp sensor. The instructions want it on the rear most exhaust manifold bolt. I didn’t want to mess with that brass washer and special nut, so I bolted it to the head directly above the exhaust manifold. Used an existing bolt hole. Kicks the choke off only when the car is warm. Works perfect every time. View attachment 1715260885 View attachment 1715260886 View attachment 1715260887 View attachment 1715260888 View attachment 1715260889 View attachment 1715260890 View attachment 1715260891

Hi Doug. That's fantastic, thanks for the information. I have bought stuff from Mike's Carburetors before, great bunch of people, and cheaper and easier than dealing with some of the so called carby experts here in Australia! Yours certainly looks a lot neater than what I'm trying to do to synchronise two chokes for a twin carby set up. By the way, what happens with the vacuum choke pull-off? Can you post an image of the other side of the carby? Unfortunately out of all those great photos, not one shows clearly how this will interract with the electric choke actuator! Hope you don't mind, I saved your images as a 'how to guide'... Cheers, Nigel