Red Headed Stepchild-75 Swinger LSX Swap

Good afternoon guys,

I completely spaced while I was working on the car today. No pictures today. But I got the two catch cans in the mail, I found a proper radiator hose for the top that works, I got the passenger side fender-well cut for the downpipe, the core support trimmed for the air filter on the passenger, the driver side marked where it needs to be cut. Cleaned up the cut on the driver side fender-well. Double checked clearance on the driver side turbo with drain line installed and the blanket/downpipe flange on and mocked up the initial bend its going to need to run down the driver side fender-well. I marked the 2 inch hole for the turbo mounts that needs to be cut out to allow for the wastegates to be installed, and verified clearance of the radiator for both wastegates, so I'm good to go there. I ordered air filters for the turbos and also some clamps for the AN lines on the car to help keep them clean and organized. That was enough for today, more to happen tomorrow.