Well you know I've done a thread about everything I've done on this car with pictures I'm sure it was something like homemade frame connectors in the suspension part of the form. But anyways I think I get on about for that $220 for those frame connectors you could buy a welder a hood a grinder with cutting blades steel and have money left over for other stuff too just doing this job.
I think I used one and a half by two and a half outer diameter. I simply filleted open the rear frame enabling me to slide the frame connector inside the frame in the rear. And the front I cut a what looks like 3 in section back cut to give more welding room. I even put a couple Stitch welds on the rear floorboard which it just pressed up against pretty tight. The overall length was just a 4-foot piece.
View attachment 1715265861 View attachment 1715265862 View attachment 1715265868You can see in the third picture the underside of the rear. The frame connector tube slides in and you can weld up these line up holes. I welded one and left the other alone. I wanted to watch them to see if they would break or Flex. They seem to have done neither.
And don't forget to buy your new welder grinder cutter and helmet foot with the money you save..
View attachment 1715265873 View attachment 1715265874 View attachment 1715265875
now if someone doesn't know how to weld they can take that cutter and cut that last two feet of that 10 footer up into pieces and start welding and watching videos.
