1973 Duster Build
Well I learned to cut wires for the motor and wired the distributor and coil. Ready for the run stand. Cleaned up a **** ton of stuff for sale and some back into BB and SB parts boxes. Dropped off the Air Gap Intake at the machine shop for the 360. Minor setback as the Icon pistons were all the same orientation on the valve reliefs. Will have wait for correct pistons. Crank was balanced and was so far off front and back that there was no way it was ever balanced when the motor was built. Pistons that were in the motor weighed 807 and these are 713. Picked up a set of pistons for a 10.5:1 500 cu 440 stroker Build......later, much later. Couldn’t pass on the price and I have 2 more 440s to build.
Well I learned to cut wires for the motor and wired the distributor and coil. Ready for the run stand. Cleaned up a **** ton of stuff for sale and some back into BB and SB parts boxes. Dropped off the Air Gap Intake at the machine shop for the 360. Minor setback as the Icon pistons were all the same orientation on the valve reliefs. Will have wait for correct pistons. Crank was balanced and was so far off front and back that there was no way it was ever balanced when the motor was built. Pistons that were in the motor weighed 807 and these are 713. Picked up a set of pistons for a 10.5:1 500 cu 440 stroker Build......later, much later. Couldn’t pass on the price and I have 2 more 440s to build.