Heater controls on 68 rally dash
I dug out my other bezels and noticed the differences that Redfish had mentioned. I marked differences with green painters tape on my 68/9 housing #1-6.
#1 missing bolt hole on 68/9
#2 missing bolt hole on 68/9
#3 "extra/added" hole on 68/9 for plastic bezel.
#4 "extra/added" bolt by Fan switch on 68/9
#5 wiper switch hole orientation.68/9 have flat sides running vertical. In 67 they are horizontal. Make sure to get proper switch!
#6 Mounting boss depth on 68/9 WAYYY taller. Zoom in on 67 housing, quite the difference.
Hope this helps having a side/side visual.
Thanks Ben!
I dug out my other bezels and noticed the differences that Redfish had mentioned. I marked differences with green painters tape on my 68/9 housing #1-6.
#1 missing bolt hole on 68/9
#2 missing bolt hole on 68/9
#3 "extra/added" hole on 68/9 for plastic bezel.
#4 "extra/added" bolt by Fan switch on 68/9
#5 wiper switch hole orientation.68/9 have flat sides running vertical. In 67 they are horizontal. Make sure to get proper switch!
#6 Mounting boss depth on 68/9 WAYYY taller. Zoom in on 67 housing, quite the difference.
Hope this helps having a side/side visual.
Thanks Ben!