1966/67 Bucket Seat Metal Backs - Anyone restored them?

I've straightened small dents and repaired nicks and breaks in the vinyl skin before dying. Razored away any loose vinyl, built the spot with gel type super glue, allowed it to cure a while, then pounced in it, ( a piece of scotch bright pad, whatever ), to get some texture. A light sanding the tall peeks down as needed and dyed right over.
You may know that you can slip a narrow putty knife under the chrome edging and knock it off easier than tape masking. Earliest had little steel clips sliding up into the chrome pieces. The later had simpler detentions/bumps stamped in edge of the back, no clips.
Beware those 2 fingers at inside top. They are only spot welded on. To reweld that really fecks up the vinyl.