Clutch Master Cylinder Mounting
I actually moved it closer to the center of the pedal. The formula is the length from the center of the pivot point to the center of the pedal pad divided by the length from the center of the pivot point to the center of the mounting hole for the linkage. It will have to be on the cross piece but it will be closer to the vertical pedal arm than it is on a stock one. The length of the bar I welded on is roughly the same length as the original just in case I didn't make the first hole correctly. Turns out I was right the first try,.
It's just 1/4" bar from Home Depot welded on as a lap weld over the original.
I actually moved it closer to the center of the pedal. The formula is the length from the center of the pivot point to the center of the pedal pad divided by the length from the center of the pivot point to the center of the mounting hole for the linkage. It will have to be on the cross piece but it will be closer to the vertical pedal arm than it is on a stock one. The length of the bar I welded on is roughly the same length as the original just in case I didn't make the first hole correctly. Turns out I was right the first try,.
It's just 1/4" bar from Home Depot welded on as a lap weld over the original.