1966 Dodge Dart
I went and picked up my bumpers yesterday at an auto show in Allentown Pa. Its about a 2 hour drive form home. Walked around and didnt see anything that caught my eye so I grabbed the bumpers from the vendor and headed home. I am very pleased with the ones they did. I had 3 frts and 2 rears to sell to them as well so all and all it was a good day.
I also ordered my drip rail trim, quarter panel pillar seals, door bumpers and the rubbers in front of the A wing from Detroit Muscle.
After dinner last night I went out and decided it was time to start another organizing/cleaning so I could find things now that I am starting to put the interior back together. I ran across the window winders in a bag so I polished one to see how it would look. Then I thought I might as well do all winders and door handles. They turned out ok for being 53 years old!
They have some very light pitting but I think Im going to go with them!.
then I found the door sills and decided to clean them up. I polished the one and heres what it looked like. Not sure if im done or will try to make them a little nicer yet.
Today I worked on getting the drivers side windows in place and adjust them as close as I could without the drip rail rubber. I also started to put the trim on the inside of the rear window. I found this to be very difficult between locating the holes thru the new headliner and the fact that its not easy to be flexible at my age!! Those screws are not at an easy place to reach while holding the trim in place.
I plan on going back out later tonight and getting a little more done but needed a break for a few hours!
Lol
Rod
I went and picked up my bumpers yesterday at an auto show in Allentown Pa. Its about a 2 hour drive form home. Walked around and didnt see anything that caught my eye so I grabbed the bumpers from the vendor and headed home. I am very pleased with the ones they did. I had 3 frts and 2 rears to sell to them as well so all and all it was a good day.
I also ordered my drip rail trim, quarter panel pillar seals, door bumpers and the rubbers in front of the A wing from Detroit Muscle.
After dinner last night I went out and decided it was time to start another organizing/cleaning so I could find things now that I am starting to put the interior back together. I ran across the window winders in a bag so I polished one to see how it would look. Then I thought I might as well do all winders and door handles. They turned out ok for being 53 years old!
They have some very light pitting but I think Im going to go with them!.
then I found the door sills and decided to clean them up. I polished the one and heres what it looked like. Not sure if im done or will try to make them a little nicer yet.
Today I worked on getting the drivers side windows in place and adjust them as close as I could without the drip rail rubber. I also started to put the trim on the inside of the rear window. I found this to be very difficult between locating the holes thru the new headliner and the fact that its not easy to be flexible at my age!! Those screws are not at an easy place to reach while holding the trim in place.
I plan on going back out later tonight and getting a little more done but needed a break for a few hours!
Lol
Rod