1962 Lancer Wagon, Lancersaurus!
I got the front exhaust pipe fitted today. It has been cold here in DFW, I am NOT complaining, sorry everyone having BAD weather. I just don't like welding in the garage with the doors closed, so I just tacked the back pipe together. I welded the head pipe to the front flange to do all the downstream cutting and fitting. I promise Ver 2.0 won't have duct tape holding it together. I set the collector too close to the transmission crossmember so I put a spacer in to move it back a couple of inches. I will replace the spacer with a pipe of pipe. Lots of steering clearance, cable clearance and I hope it will come out if needed, but I will have to see. All the pipe is 2 inch and the Flowmaster 2 to 1 is a 2 inch to 2.5 inch. Should be enough air for a 170.
I got the front exhaust pipe fitted today. It has been cold here in DFW, I am NOT complaining, sorry everyone having BAD weather. I just don't like welding in the garage with the doors closed, so I just tacked the back pipe together. I welded the head pipe to the front flange to do all the downstream cutting and fitting. I promise Ver 2.0 won't have duct tape holding it together. I set the collector too close to the transmission crossmember so I put a spacer in to move it back a couple of inches. I will replace the spacer with a pipe of pipe. Lots of steering clearance, cable clearance and I hope it will come out if needed, but I will have to see. All the pipe is 2 inch and the Flowmaster 2 to 1 is a 2 inch to 2.5 inch. Should be enough air for a 170.