273 hydraulic cam/pushrod/adjustable rocker combination.

nm9stheham said
Those adjusters look well down lower than normal, so short pushrods makes sense. How are you measuring the pushrod length? Top of cup to end of ball, or bottom of cup to end of ball?

That's not a ton of lift so that would be less likely to cause the pushrod to contact the hole. But, the short pushrods and the resulting adjuster position would move the pushrod over towards the side of the hole where your pix shows contact, so that could be the reason for the bending.
Click to expand...
I agree with the adjusters being screwed in lower then normal but they are all over the map as well. Kinda the reason for mr to look deeper and check adjustment. Pic is of #1 and 7IMG_0701.JPG IMG_0700.JPG .. see attached pics.