1972 Duster Build with my Daughter
After that depressed the hell out of me I decided to find something else to screw up... Pulled the condenser off the drying rack and slid it in. Since I decided to use the '72 lower radiator support with the Demon chin fairing tab the hole for the bottom brackets were not there so I drilled them out and installed the condenser.
Next on the agenda was to get the AC lines run (don't worry this is the old dryer for fit check, when the system is about to be sealed I will install the new one).
This brace is a SOB, these bolts come in from the back and you have to have the radiator out to get to them... We are going to paint that bracket black so it won't show blue through the grill.
Latch will be painted black too.
Dug out the headlight adjuster kit and installed the head lights. Those spring are a bugger to get started and need a bit of re-bending to get them started..
Lastly bead blasted the fresh air duct and restored it.
After that depressed the hell out of me I decided to find something else to screw up... Pulled the condenser off the drying rack and slid it in. Since I decided to use the '72 lower radiator support with the Demon chin fairing tab the hole for the bottom brackets were not there so I drilled them out and installed the condenser.
Next on the agenda was to get the AC lines run (don't worry this is the old dryer for fit check, when the system is about to be sealed I will install the new one).
This brace is a SOB, these bolts come in from the back and you have to have the radiator out to get to them... We are going to paint that bracket black so it won't show blue through the grill.
Latch will be painted black too.
Dug out the headlight adjuster kit and installed the head lights. Those spring are a bugger to get started and need a bit of re-bending to get them started..
Lastly bead blasted the fresh air duct and restored it.