What Are You Doing To/With Your Car Today?
Replaced the drivers side motor mount from solid back to factory. (Chasing vibration) planned on removing the header to clearance from power stearing box. Removed outer tie rod,pitman, idler arm. Then I remembered I had to shim the passenger side motor mount. Removed the shims and the headers cleared. Put steering parts back in hahahahaha. Moved spring back to frame rails. Have to weld perches. Installed other wheels and tires.
Fabbed up speaker extension for under dash speaker. Mounted it and new Bluetooth radio.
Removed reciever hitch. 3 bolts on either side. Had to take out the front two bolts.
I forgot the shackle issue.
The frame rail tube that is welded in is wider than lower leaf springs. Anybody stack washers so they’re straight?
Replaced the drivers side motor mount from solid back to factory. (Chasing vibration) planned on removing the header to clearance from power stearing box. Removed outer tie rod,pitman, idler arm. Then I remembered I had to shim the passenger side motor mount. Removed the shims and the headers cleared. Put steering parts back in hahahahaha. Moved spring back to frame rails. Have to weld perches. Installed other wheels and tires.
Fabbed up speaker extension for under dash speaker. Mounted it and new Bluetooth radio.
Removed reciever hitch. 3 bolts on either side. Had to take out the front two bolts.
I forgot the shackle issue.
The frame rail tube that is welded in is wider than lower leaf springs. Anybody stack washers so they’re straight?