1972 Duster Build with my Daughter
It does not seem like it should take a lot of work but vinyl tops are a PIA.....
Dug out the Harbor Freight sprayer and after 20 minutes and glue everywhere I put it where it deserved....
I used my real paint gun and it worked great with a 2mm needle. It was getting old and I was going to delegate it to a primer gun anyway...
This makes SO MUCH DIFFERENCE IT IS NOT POSSIBLE TO SAY IT IN WORDS..... The wife clothes steamer saved the day....
Peeled off the tape.
THE PAPER IS A BIG BIG BIG MISTAKE... Don't do this...
It stuck so we waited for it to dry then used a razor to scrape it clean. After words we shot a bit more glue for good measure..
Here is the secret, use 6 mil plastic sheet. It is strong enough so it won't rip when pulling on it. This made the rest of the day go much better... Here the center is done and we are doing the side..
It does not seem like it should take a lot of work but vinyl tops are a PIA.....
Dug out the Harbor Freight sprayer and after 20 minutes and glue everywhere I put it where it deserved....
I used my real paint gun and it worked great with a 2mm needle. It was getting old and I was going to delegate it to a primer gun anyway...
This makes SO MUCH DIFFERENCE IT IS NOT POSSIBLE TO SAY IT IN WORDS..... The wife clothes steamer saved the day....
Peeled off the tape.
THE PAPER IS A BIG BIG BIG MISTAKE... Don't do this...
It stuck so we waited for it to dry then used a razor to scrape it clean. After words we shot a bit more glue for good measure..
Here is the secret, use 6 mil plastic sheet. It is strong enough so it won't rip when pulling on it. This made the rest of the day go much better... Here the center is done and we are doing the side..