1972 Duster Build with my Daughter
Now we shot the roof...
Here is the 6 mil plastic that keeps it from sticking before you want it to.
Side is done. We placed the trim where it belonged then taped the top and bottom. Now I can cut down the center directly under the trim.
Just like that. Notice how I cut relief cuts to allow it to relax into the drip channel. I bought 2 plastic glass bones from Steel Rubber when I ordered the front and back glass gasket a few weeks ago. They worked great to heat up the vinyl with the steamer then use the plastic tool to seat the material into the grooves and channels.
These are the only clips available. They are not right and to narrow. If you flip them over there are 2 tangs that will hold the trim.. It is not super tight to the body but it won't fall off..
Other side is done and we got the drip moulding polished and installed on this side.
Just like we know what we are doing!
Now we shot the roof...
Here is the 6 mil plastic that keeps it from sticking before you want it to.
Side is done. We placed the trim where it belonged then taped the top and bottom. Now I can cut down the center directly under the trim.
Just like that. Notice how I cut relief cuts to allow it to relax into the drip channel. I bought 2 plastic glass bones from Steel Rubber when I ordered the front and back glass gasket a few weeks ago. They worked great to heat up the vinyl with the steamer then use the plastic tool to seat the material into the grooves and channels.
These are the only clips available. They are not right and to narrow. If you flip them over there are 2 tangs that will hold the trim.. It is not super tight to the body but it won't fall off..
Other side is done and we got the drip moulding polished and installed on this side.
Just like we know what we are doing!