TF727 part throttle shift points

oldkimmer said

I would check the pressures, then report back. I suspect the line pressure is to high. What is the front band set at. How many springs in the front servo. How many springs in the front drum. What clearance is in the front drum and how many clutches and steels. How big of holes did u drill in the separator plate? Kim

Click to expand...

We set the front band according to the TF2 instructions. I don’t remember off the top of my head.

The servo is an upgraded unit. I believe the stock spring. I’ll have to read my transmission notes again.

We did upgrade the amount of springs in the drum. But didn’t go overboard. I believe it was 12 springs.

And we went mild with the shift kit because of the stock converter. We didn’t want to harsh of shifts.

I believe it has a 4.2 kick down arm also

I’ll have to check my notes and get back.

Thanks. Eric