1972 Duster Build with my Daughter

Spring break! And Kaelyn has the flu.... I took the rest of the week off so it figures. I ended up working on the car anyway and she came out to sit in the seat and talk for 2 hours straight :)

Seat Tracks



Here are the cool sliders/rollers. This soft plastic that have ball bearing captured on the sides and a roller on the top... The bearings caused lots of galling on the track so make sure you file it smooth before painting.



Now slide the top track on and over slide it. Then you can put the second plastic bushing on and then slide the upper track back over it and your done.



Here you can see the dimples from the bearing on the track..



All done.



Restored the mirror and visors. Are these the right visors for this car?



Reworked the headliner in this area and made it much tighter. Looks a lot better. You can play a tune on it like a drum it is so tight.



Same on this side.



Glued the insulation under the package shelf and installed the seat back for good.



I mark the seat hole buy pushing an o-ring pick from the bottom.