1972 Duster Build with my Daughter
In goes the Out of Sight bluetooth stereo. Mounted it to the bottom of the glove box.
Simple hookups are all that are needed.
Made a tap off from the radio fuse in the fuse box to power it.
All done and now just a series of final configuration documentation photos across the dash.
Remove all the paint from the frame at the attachment points so it gets a good ground.
The aftermarket ignition switch connector was not compatible with the original pins for the light for the hazard button an the key in switch so I made them compatible by drilling them out one size larger. Then the old connect pins would go in and snap in place.
In goes the Out of Sight bluetooth stereo. Mounted it to the bottom of the glove box.
Simple hookups are all that are needed.
Made a tap off from the radio fuse in the fuse box to power it.
All done and now just a series of final configuration documentation photos across the dash.
Remove all the paint from the frame at the attachment points so it gets a good ground.
The aftermarket ignition switch connector was not compatible with the original pins for the light for the hazard button an the key in switch so I made them compatible by drilling them out one size larger. Then the old connect pins would go in and snap in place.