1965 MMP's Barracuda Hemi swap! The Ever Changing Build
Okay got some cuts made and a few tack welds finished. Coller made to fit the EPAS unit to the column. Mochup and final placment of the unit located and installed.
So far its just mounted to the column, i plan on adding a few solid mounts to the pedal box.
I was able to orient it without cutting too much of the pedal box but only cause I won't be using the stock ebrake mechanism. If you plan on doing this and retaining the use of either the vent door or ebrake or both you will need to rotate it up much more than mine.
I tried fitting it much like EPAS performance but they don't require and cutting of the box and only a spacer to off set the ebrake mount. Well that has the motor of the unit infront ot the vent door. Thsi seemed very dumb so I notched the pedal box enough to roll everything up. This also made for a clean mount and very little underhang.
These are the pictures i have as of now.
I will be taking better picture with greater detail to what i modified in the future once i have everything finished.
Okay got some cuts made and a few tack welds finished. Coller made to fit the EPAS unit to the column. Mochup and final placment of the unit located and installed.
So far its just mounted to the column, i plan on adding a few solid mounts to the pedal box.
I was able to orient it without cutting too much of the pedal box but only cause I won't be using the stock ebrake mechanism. If you plan on doing this and retaining the use of either the vent door or ebrake or both you will need to rotate it up much more than mine.
I tried fitting it much like EPAS performance but they don't require and cutting of the box and only a spacer to off set the ebrake mount. Well that has the motor of the unit infront ot the vent door. Thsi seemed very dumb so I notched the pedal box enough to roll everything up. This also made for a clean mount and very little underhang.
These are the pictures i have as of now.
I will be taking better picture with greater detail to what i modified in the future once i have everything finished.