65 Barracuda w/500ci RB, Stage VI Max Wedge Port Heads, 6-speed, and 5.38 Dana
Anything not worth upgrading gets reused, e.g., the the spacers in the crossmember where the transmission crossmember attaches. I cut them down to 1 13/16" and centered them on the holes. They will get welded in when I weld the rest of the crossmember, but temporarily they will keep the metal from flexing while I drill the outboard holes.
Anything not worth upgrading gets reused, e.g., the the spacers in the crossmember where the transmission crossmember attaches. I cut them down to 1 13/16" and centered them on the holes. They will get welded in when I weld the rest of the crossmember, but temporarily they will keep the metal from flexing while I drill the outboard holes.