[WANTED] 67 Barracuda drivers side door jamb

mosleyme said:

1970-1976 Plymouth Parts | MM1355 | 1970-76 Mopar A-Body Restorers Choice™ Door Jamb Lock Pillar; LH | Classic Industries

Click to expand...

Gedimaster1 said:

I need one for an A Body 67 Barracuda.
Thanks anyway.

Click to expand...

Gedimaster1 said:

Does this fit my vehicle?
Doesn’t mention the 67 Barracuda.

Click to expand...

mosleyme said:

Sorry, was looking at it on my cell phone and misread the years.

Click to expand...

Gedimaster1 said:

Hi all, is anyone parting out a 67 Barracuda? I’m needing a good condition drivers side door jamb.
We’ve got a new quarter panel going on it soon, but the jamb has had a rough repair done on it after a side swipe damaged it a while back.
Can pay thru PayPal & I have a US Shipping address in CA.
Thanks, Ged.

View attachment 1715310164

Click to expand...

mosleyme said:

I made a trip up into the attic this morning, have not been up there in 6 months. More up there than I remembered. This is LH from a ‘68. Not perfect, tell me if it will work for you. The sheet metal around the striker probably needs repaired, I highly recommend the Dynamic Renovations kit, used it on my car on both sides. I would cut it away from the remainder of the rocker to ship it but would not cut or drill this piece more than it already is. Guy I bought it from drilled the spot welds from the quarter panel. I bought the quarter, jamb, and full rocker from him. Ended up using part of the rocker.

View attachment 1715311882 View attachment 1715311883 View attachment 1715311884 View attachment 1715311887 View attachment 1715311888 View attachment 1715311889 View attachment 1715311890 View attachment 1715311891

Click to expand...

Gedimaster1 said:

Oh what a bugger, I Did a deal with another member yesterday for one. That one looks good though, I appreciate you getting back to me.
Paid $100 + shipping for it.

Click to expand...

toplscuda said:

That looks familiar

Click to expand...

mosleyme said:

Yep, the guys who did the body and paint on my car found the quarter was in better shape than they thought after media blast; so it was easier to work with that one than to swap. They did some hammer and dolly magic, it was almost paint ready before they even touched it with the filler. We did end up using a section of the rocker. The rest I still have.

I wasn't sure what they could do with this crease, and did not know what other damage was underneath.
View attachment 1715313353

Found this under after media blast:
View attachment 1715313355

Cut it out:
View attachment 1715313354

Sectioned in a piece:
View attachment 1715313356

This was all done, mostly hammer and dolly work, crease is gone:
View attachment 1715313357

In guide coat:
View attachment 1715313359

After paint:
View attachment 1715313360

Click to expand...