68 Valiant Hellcat Swap
Laid down some paint
Mocking up my back wheels before I narrow the 8 3/4 rear; wheels are Weld RTS S71's with a 5.5 BS on a 10 inch wide rim.
Had to modify the passenger side harness to route the PDC wire inside the car. Also gives the passenger side apron some more breathing room.
When routing the PDC wiring in the car I also had to reposition the splice for the alternator wiring. I also moved the wires for the starter to be mounted on the drivers side of the motor.
Everything mounted on the firewall for the last time
She's in!
Laid down some paint
Had to modify the passenger side harness to route the PDC wire inside the car. Also gives the passenger side apron some more breathing room.
When routing the PDC wiring in the car I also had to reposition the splice for the alternator wiring. I also moved the wires for the starter to be mounted on the drivers side of the motor.
Everything mounted on the firewall for the last time
She's in!