Stop in for a cup of coffee

Mattax said

That would make sense since they are close to stock diameter. The ones I bought are as I posted (but they are also larger diameter). It may have been that the ones over .990 got the 30 degree clocking - its been 20 years - so its all fuzzy now!
Still I've seen people have problems - I think in part because they don't let the arm and adjuster hang in droop.

Click to expand...

With the MP bars, if there are issues it is usually because the adjusters are shot or the plates the bolts go into are bent. Mine were which is why I bought new QA1 adjuster sets when I bought the .920 MP bars. I knew they were fubar before I got the new stuff because the stock left side wouldn’t dial up any further but the right side would. The left side plate was bent into an arc instead of being flat.

You can not screw up with the MP bars, left and right only...the rest either goes in or it doesn’t. If it goes in, it’s right. The issue people have is always with the height adjustment, nothing else.