71 Dart 410 stroker ..

yes....but there is a problem with the engine at this time....the heads will show up later this fall on a very similar short block which i was working on this afternoon......the old mp 557 cam appears to have flatten a lobe or two...

prior to the cam issue the car had picked up 3 tenths over the stock eddy heads...then they started to work on it...removed power valve but did not up jetting...should have been 83 square..they had it at 77 square...after they had adjusted the valves ...several adjusters and jam nuts had backed off...I gave them my LSM valve adjuster tool and torque wrench...but I think the damage was done.

the car probably will get a roll bar this summer also...and get rid of the heavy steel bumper plus the 5 mph shocks....