6.1 Hemi 69 Barracuda Fastback Father Son Project
Curious if the manual steering box has to be used or if a power unit could be used with a G3?
I tried Jeep SRT manifolds first. Could have made them work with some grinding and/or double U-Joints or... nah, no grinding and no double u-joints...
I ended up going with TTi Headers to clear everything.
Firm Feel 16:1 Manual steering gear but it will be EPAS, Electric Power Assisted Steering.
Stock Power steering has been done but more of a challenge to fit.
Quite a few have gone with a Borgeson Box which is quite a bit smaller than a stock mopar box.
EPAS has been part of our plan and budget from early on.
I like that it will look like manual steering under the hood. No Pump, no Fluid, no pulley, no belt, no leaks, no parasitic HP drain on the engine except the Alternator load and only when you turn the wheel.
Dial in the amout of assist you like with a dash mounted potentiometer.