6.1 Hemi into 72 Demon March 2018

Apologies for the delay in response, we are getting ready for the National Mopar show in Minneapolis this weekend. When I return to the shop on Sunday I will get you the number for the pan. There is a lot of varied opinions over Milodon on this Forum. I can only relate my experience and I have just not had any issues. Fitment has been fine and no leaks. The pick up tube was an issue for me as it turned out the year of my block was not as advertised. You will need to get a different pick up tube and windage tray. I can give you all those numbers as well on Monday. The pans do hang low and if you pick front tires up on occasion you must land soft! Staring at the sky and using the retaining wall for reference can be a bit unsettling! No pan survives the panic lift and ensuing drop to the pavement!
No worries.. I just posted this lol. No need to rush, I was able to locate it on their site. I ordered the rear sump pan and discovered that the pan bolts do not line up and later learned from a post on fb that you are unable to get the starter to work if using a tr6060. I sent that pan back this afternoon.