340 to 372 stroker kit

what yr says
for info though go to the B3 webpage and he has several articles explaining
you might have to make new stands- we used to do that all the time
you will find b3 very helpful even if you do not buy his kit
and he will most likely give you the dimensions you need
long valves?
other special dimensions?
what size pushrods
guys and gals
what is a common data point for valve height
from the sporing cup does not work as they get cut
OP longer or different than stock W2 or any MOPAR valves changes the contact point of the rocker
AS YR said do not consider at first the centering of the contact patch eventhough several if nor most camgrainder instructions say to do this- it get's you all xxxyyyed up
work on narrowest sweep- which is when the rocker is perpendicular (with a line through the trunion and roller tip) to the valve stem = parallel to the valve tip and retainer- slide your machinist rule up