just one more cam selection thread

comp 262 vs Lunati or other MOPAR cam
pointy nose versus big nose- your choice
as rumble says the summit cam would save a couple of bucks but looses torque
the whiplash also costs torque-I'd like nothing that costs torque down low for your build
the crane 901 260 advertised duration is more like the 256 Mopar cams durations than the 262 comp or lunati
comp, crane and summit all lose torque
comp has nothing below 274 that competes
similar priced cams why leave power on the table
agree with 66fs just enough higher to get into the flow sweet sport but not enough higher to get into much turbulance
with a nice multi angle valve job and a little blend on the bottom cut maybe a half inch
it's not like using stones where all the extra angles take much more time
btw using the larger Mopar lifter makes more difference than high lift rockers and is essentially free power