[WANTED] 8.25 Rear End

-
Status
Not open for further replies.

mopar_nocar

Well-Known Member
Joined
Jul 26, 2005
Messages
477
Reaction score
105
Location
Center Point, TX
Rating - 100%
7   0   0
Contact seller
I would like an 8.25 rear end to put into my 64 Valiant. ideally it would be drum to drum and not trash. 3.21+ ratio would be nice, but not mandatory.

Barring that I would take a complete BBP 7.25 IF it had a 3.21 or higher ratio...and wasn't sloppy.

I would take an 8.75, but those are gold plated...

Thanks.

sb
 
Got a big bolt 7.25 complete drum to drum it's in a 74 duster dont know ratio..$150
 
Not unless fender tag indicates...its still under 74 duster..
 
I have a 8.25 from 75 duster. It is BBP with 4.10 suregrip, complete drum to drum.
 
I have an 8.25 big bolt pattern rear end out of a 73 dart The housing has been Powder coating and the rear has been put together but the pinion is not set at the right dept so it needs to be set up correctly it has a brand new Mopar ring and pinion it has a good used suregrip it has the 10 x 2 1/2 backing plates and axles asking 750 and I can arrange shipping through Fastenal if you’re interested
 
Status
Not open for further replies.
-
Back
Top