New in here need some advice SB 360 Cam selection
Hello guys my new heads are in the building now :thumbsup:.
Here are some pics of them.
The Heads are ProComp/SpeedMaster "Bare" has has 64cc chambers with Howard springs, Competition Products 21-4N valves,
flows: intake :255,4 cfm at .500 lift and 250 at .450cfm
Exhaust: 194cfm at .500 lift and at. 450 they flow around 188cfm
They are controlled and installed of Swedish Company called PPM Racing
The valveseats are done by them to. 5 Angle valve job
Take care
The photos is taken with a cellphone
Hello guys my new heads are in the building now :thumbsup:.
Here are some pics of them.
The Heads are ProComp/SpeedMaster "Bare" has has 64cc chambers with Howard springs, Competition Products 21-4N valves,
flows: intake :255,4 cfm at .500 lift and 250 at .450cfm
Exhaust: 194cfm at .500 lift and at. 450 they flow around 188cfm
They are controlled and installed of Swedish Company called PPM Racing
The valveseats are done by them to. 5 Angle valve job
Take care
The photos is taken with a cellphone